Complete Pork Sword Pistol

From: $1,450.00

Remington Factory actions are almost impossible to find so we are  temporarily not offering this product. We are exclusively  building on custom actions now click here for more info. If you have questions email Jeeves at

Turn-key, custom pistol builds direct from Black Collar Arms! Use the configurator below to build out your Pork Sword Pistol exactly as you want it. If you add a FARend, brace, trigger, pistol grip, and/or angled forward grip, we will install them on your pistol during assembly (unless you state otherwise in your order notes).

Don’t forget to e-mail your transfer FFL to us at, or have your dealer email it to us (ideally they’ll reference your name and order number). We cannot ship this complete firearm without a valid FFL.

Your Pork Sword Pistol is a handgun / pistol (not a rifle or long gun) and will transfer as such. Make sure you know your state’s laws regarding manual action handguns, magazine capacity restrictions, approved firearm rosters, etc. before ordering. Must be 21+ to purchase.

Full details and specifications are below the configurator, near the bottom of the page.



The base Pork Sword Pistol includes Pork Sword Chassis, blueprinted and trued Remington 700 factory action with either .308-sized or .223-sized bolt face, Remington X-Mark Pro Trigger, recoil lug, the barrel of your choice, and a thread protector. All assembled properly.

That’s it. We do it this way because we want you to be able to configure exactly the gun you want and not have to pay for things you don’t want. Choose pistol braces, AR15 grips, FARends, magazines, and other components from us — if you buy ’em, we install ’em — or bring your own to the party.

300 Blackout guns are built on blueprinted and trued factory actions with 1:7 twist, 5R rifled, stainless steel KAK barrels. The entire action and barrel are then Cerakoted black.

.308 Winchester guns are built on blueprinted and trued factory actions with 1:8 twist, stainless steel MÔS-Tek ultra match-grade barrels. The entire action and barrel are then Cerakoted black.


Materials: our Pork Sword Chassis and FARends are made in Texas from domestic 7075-T651 aluminum and Mil-Spec Type III Hardcoat anodized.

Weight: from 4.1 lbs to 5.2 lbs depending on barrel length (6.5-inch to 12.5-inch). That weight includes chassis, action, trigger, recoil lug, hardware, and barrel. Other components add to this. For reference, the SB Tactical FS1913 is 10.3 ounces, our 8-inch Tri-LOK FARend is 2.6 ounces, and our 12-inch Tri-LOK FARend is 3.8 ounces.

Barrels: Muzzles are threaded 5/8×24. Barrels are 416R stainless steel, then Cerakoted along with the action after assembly.

Compatibility: Chassis accepts AICS pattern magazines and any AR15 grip. Picatinny rail at rear accepts many common adapters and mounts for various pistol braces, or run it without a brace. FARend attaches via front Picatinny rail and has M-LOK slots on sides and bottom. It can be run underneath a suppressor or muzzle device up to 1.75 inches in diameter (e.g. use a 12-inch FARend on a 6.5-inch barrel plus suppressor).

Custom Work: Looking for a high-end action and barrel or a chambering not offered on the configurator here? We can do it! A full 22 chamberings are available in our Custom Pork Sword Pistol builds HERE.

Additional information

Weight 125 oz
Dimensions 40 × 6 × 3 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.