General

  • Black Collar Arms 300 BLK 1:5 Twist AR-15 Barrels

    New and limited! We've done a production run of Ultra Match Grade, 7-inch, 1:5 twist 5R rifled, 300 Blackout AR-15 barrels. These are made from 416R stainless steel Criterion blanks and are beautifully salt bath nitrided a deep, jet black. 5/8x24 muzzle threads.
    Add to cart

  • Black Collar Arms Match Grade Barrels

    Our ridiculously amazing barrels begin life as some of the highest-quality barrel blanks available in the country. These blanks are precision button rifled to an incredibly precise tolerance, then they are air-gauged, carefully lapped, and stress relieved through a careful heat treat process.
    Select options

  • AB Suppressor .375 RAPTOR 8 Suppressor Package

    Sale!
    The Raptor 8 from AB Suppressors became our favorite suppressor for shooting our favorite cartridge, 375 Raptor. After using it on more and more firearms from 5.56 to .308 to 300 Blackout to 9mm it is now one of our favorite silencers on the market. It's just so dang versatile, lightweight, and quiet! We now offer the Raptor 8 in four different calibers. LEAD TIME: Approx 4 weeks for black or raw Ti, approx 8 weeks for other Cerakote  
    Select options

  • AB Suppressor F4 Suppressor

    Sale!
    This super compact, 9mm PCC silencer is 100% titanium with a 1/2x28 direct thread mount and weighs only 4. 4 ounces. It's very quiet for its size, and it's so dang lightweight that it runs on most pistols even though it doesn't have a booster. Very cool!
    Select options

  • APS Adjustable Pistol Support

    Not a shoulder stock, not a pistol brace, the brand new Black Collar Arms APS -- Adjustable Pistol Support -- is a height adjustable rest designed to support a precision pistol on a bench, ground, or other surface. It's a brand new category of rear accessory for firearms and is ideally suited to large, accurate pistols. It will be available first in a clamp-on design for pistol buffer tubes and anything that accepts a GHW Tailhook MOD 1 (fits round tubes from 1.17" to 1.20" in diameter).
    Select options

  • Black Collar Arms Barrel Nuts

    Black Collar Arms Barrel Nuts allow for end-user barreling and headspacing with the use of headspace gauges and a standard, 1.25-inch wrench.
    Select options

  • MDT Poly/Metal AICS Magazine

    Sale!
    MDT poly/metal AICS magazine for .308/6.5 CM family of cartridges, including 375 Raptor. Holds 10 rounds. Max COAL 2.850".
    Select options

  • Raptor Adapter

    Sale!
    The AB Suppressor Raptor Adapter converts the threads in the base of the AB RAPTOR suppressor to the increasingly-standard 1.375x24 (1-3/8x24) thread pitch used by many in the industry. This opens up many dozens of mount options for your RAPTOR  including pistol boosters and so much more.
    Add to cart

  • SIG SAUER SIERRA 6 BDX 2-12x40mm Scope

    Sale!
    The SIERRA6BDX 2-12x perfectly complements a Black Collar Arms SBDđź’¨ or Pork Sword. It's a compact, lightweight scope that's incredibly fast in the field. Glass quality and build quality are both fantastic. These are top-notch optics at an extremely competitive price. When paired with a SIG BDX rangefinder (we'll offer a package deal soon...at the moment SIG is refreshing its rangefinder line and they're out of stock), the SIERRA6BDX instantly illuminates one of 145 holdover LEDs built into the reticle to provide you with the correct range hold for your specific firearm and ammunition combination. https://youtu.be/OFPhqV-Zpw8
    Adjustment Increments: 0.25 MOA
    Weight: 21.4 ounces
    Maintube Diameter: 30mm
    Waterproofing: IPX7
    Illumination Settings: 8 Daytime, 2 Night Vision
    Total Elevation Travel: 60 MOA
    Total Windage Travel: 60 MOA
    Battery: Two CR2032
    MSRP: $1,169.99
    Add to cart

  • Timney Elite Hunter Trigger

    Sale!
    Timney Triggers Elite Hunter for Remington 700 and clone actions, set to approximately 2.5 lbs and user adjustable from 1.5 to 4 lbs. Straight, wide trigger shoe with black finish. This is a fantastic trigger and it's our go-to for our Retail Shop Pork Sword Pistols and Rifles. If you need a left handed trigger, please mention this in the customer notes section during checkout! Otherwise, the default will be a RH trigger.  
    Add to cart

  • Pork Sword Actual Velcro Patch

    It's the PVC rubber Pork Sword Actual patch we've all been waiting for!
    Read more

  • Forged Carbon Fiber Cantilever Scope Mounts

    These are the most rigid, most secure scope mounts on the market and maintain flawless zero in any condition. As if the gorgeous carbon fiber aesthetic wasn’t enough! 1.54 inches from top of optic rail to centerline of scope (typical AR-15 height).
    Select options

Everything that ships correctly based on size and weight